Lianhe
LIANHE
Industrial Computing

PoE switches

JSW-8024

JSW-8024 Rugged PoE Switch

Layer 3 managed · PoE+

  • Copper Ethernet24 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
  • Optical interfaces4 × 10 Gigabit optical channels.
  • Switching & managementLayer 3 managed Ethernet; store-and-forward switching.
Request a quote ↗Full specifications ↓

DESIGN & CONFIGURATION

Product overview

  • 24 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
  • 4 × 10 Gigabit optical channels.
  • 2U rack enclosure with rugged connector options
  • Configurable PoE budget and network management

TECHNICAL DATA

Reference specifications

Reference configuration. Customizable to your requirements.

Copper Ethernet24 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
Optical interfaces4 × 10 Gigabit optical channels.
Switching & managementLayer 3 managed Ethernet; store-and-forward switching.
Switching platformMarvell Prestera-based OEM switching design can be specified. ASIC, PHY, control processor and network software are selected for the required port layout and operating environment.
Port bandwidth target128 Gbps aggregate full-duplex port-bandwidth target for the listed Ethernet interfaces. Actual forwarding capacity, packet rate and enabled-feature performance are validated for the selected ASIC and firmware.
MAC address table32K-entry target; dynamic learning, aging and static entries. Final table resources depend on the ASIC and enabled features.
VLANIEEE 802.1Q VLAN configuration; target up to 4K VLAN identifiers. Port-based VLANs and additional policies depend on the selected firmware.
MulticastIGMP v1 / v2 / v3 snooping options; multicast table resources and configuration depend on firmware.
Quality of serviceConfigurable traffic prioritization, 802.1p / DSCP mapping and weighted queue scheduling; final queue count and policies depend on firmware.
Routing optionsStatic IPv4 / IPv6 routing and inter-VLAN routing can be specified. Dynamic routing protocols and route-table scale depend on the selected network software.
SecurityRole-based access, SSH / HTTPS administration, SNMPv3 options, port security and storm control. 802.1X and RADIUS can be specified with compatible firmware.
Management interfacesLocal console and command-line management; HTTPS web interface and SNMP options. Configuration backup, firmware upgrade and event logging depend on the selected software image.
PoE capabilityIEEE 802.3af / 802.3at PoE / PoE+ integration; up to 30 W PSE output per enabled PoE+ port, subject to the total power budget. Specify simultaneous powered-device loads; full power on every port is not assumed.
Aggregate PoE budgetAggregate PSE output budget is specified in the quotation, separately from AC input power and base-switch consumption.
Optical specificationRugged optical connectors and internal transceivers; fiber mode, wavelength, reach and connector pinout are matched to the network.
Copper link operation10 / 100 / 1000 Mbps auto-negotiation and auto MDI / MDI-X. Gigabit links operate full duplex.
Console & power connectors1 console interface and 1 power input in the reference layout; locking circular connectors, pinout and cable assemblies specified for each project.
Power input100–240 V AC, 50–60 Hz reference input. Supply capacity is engineered for electronics, optics and any PSE load; optional DC input on request.
Enclosure & mounting2U rugged 19-inch rack enclosure; connector protection, finish and mounting hardware configurable.
Dimensions483 × 400 × 88 mm (W × D × H), enclosure-family reference; final drawings depend on connectors and mounting hardware.
WeightUp to 12 kg enclosure-family reference; actual weight depends on the selected power supply and modules.
Operating environmentTarget operating range: -40°C to +65°C; storage and humidity requirements specified per project. Qualification applies to the complete configured system, including PoE load and optics.
CustomizationCopper / optical port mix, network features, PoE budget, power input, connectors, cabling and environmental test requirements can be specified.

PROJECT REQUIREMENTS

Environmental & EMC testing

For international projects, specify the required test standard, method, severity and acceptance criteria in your inquiry. Potential references include MIL-STD-810 or IEC 60068 for environmental testing, and MIL-STD-461 for equipment EMC testing. Applicability must be reviewed for your application.

Test methods, levels and acceptance criteria are agreed for the configured system. Request applicable reports for your project; listing a standard does not indicate certification.

LET’S DISCUSS YOUR PROJECT

Configure your JSW-8024.

Tell us about your application, quantity and configuration requirements. Our sales team will help you plan the next step.

Request a Quote ↗

Open Project Enquiry with this product already selected.

Visit our Alibaba Storefront ↗