PoE switches
JSW-2024POE
JSW-2024POE Rugged PoE Switch
Layer 2 managed · PoE+
- Copper Ethernet24 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
- Optical interfacesNo dedicated optical uplinks in this reference layout.
- Switching & managementLayer 2 managed Ethernet; store-and-forward switching.
DESIGN & CONFIGURATION
Product overview
- 24 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
- No dedicated optical uplinks in this reference layout.
- 2U rack enclosure with rugged connector options
- Configurable PoE budget and network management
TECHNICAL DATA
Reference specifications
Reference configuration. Customizable to your requirements.
| Copper Ethernet | 24 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors. |
|---|---|
| Optical interfaces | No dedicated optical uplinks in this reference layout. |
| Switching & management | Layer 2 managed Ethernet; store-and-forward switching. |
| Switching platform | Marvell Prestera-based OEM switching design can be specified. ASIC, PHY, control processor and network software are selected for the required port layout and operating environment. |
| Port bandwidth target | 48 Gbps aggregate full-duplex port-bandwidth target for the listed Ethernet interfaces. Actual forwarding capacity, packet rate and enabled-feature performance are validated for the selected ASIC and firmware. |
| MAC address table | 32K-entry target; dynamic learning, aging and static entries. Final table resources depend on the ASIC and enabled features. |
| VLAN | IEEE 802.1Q VLAN configuration; target up to 4K VLAN identifiers. Port-based VLANs and additional policies depend on the selected firmware. |
| Multicast | IGMP v1 / v2 / v3 snooping options; multicast table resources and configuration depend on firmware. |
| Quality of service | Configurable traffic prioritization, 802.1p / DSCP mapping and weighted queue scheduling; final queue count and policies depend on firmware. |
| Routing options | Layer 2 reference configuration; IP routing is not included. A Layer 3 variant requires a suitable ASIC and software feature set. |
| Security | Role-based access, SSH / HTTPS administration, SNMPv3 options, port security and storm control. 802.1X and RADIUS can be specified with compatible firmware. |
| Management interfaces | Local console and command-line management; HTTPS web interface and SNMP options. Configuration backup, firmware upgrade and event logging depend on the selected software image. |
| PoE capability | IEEE 802.3af / 802.3at PoE / PoE+ integration; up to 30 W PSE output per enabled PoE+ port, subject to the total power budget. Specify simultaneous powered-device loads; full power on every port is not assumed. |
| Aggregate PoE budget | Aggregate PSE output budget is specified in the quotation, separately from AC input power and base-switch consumption. |
| Optical specification | Optical expansion can be evaluated for a different connector layout. |
| Copper link operation | 10 / 100 / 1000 Mbps auto-negotiation and auto MDI / MDI-X. Gigabit links operate full duplex. |
| Console & power connectors | 1 console interface and 1 power input in the reference layout; locking circular connectors, pinout and cable assemblies specified for each project. |
| Power input | 100–240 V AC, 50–60 Hz reference input. Supply capacity is engineered for electronics, optics and any PSE load; optional DC input on request. |
| Enclosure & mounting | 2U rugged 19-inch rack enclosure; connector protection, finish and mounting hardware configurable. |
| Dimensions | 483 × 400 × 88 mm (W × D × H), enclosure-family reference; final drawings depend on connectors and mounting hardware. |
| Weight | Up to 10 kg enclosure-family reference; actual weight depends on the selected power supply and modules. |
| Operating environment | Target operating range: -20°C to +60°C; storage and humidity requirements specified per project. Qualification applies to the complete configured system, including PoE load and optics. |
| Customization | Copper / optical port mix, network features, PoE budget, power input, connectors, cabling and environmental test requirements can be specified. |
| Video recording option | Optional integrated NVR: target up to 32 IP video channels and 4 TB local storage; H.264 / H.265 input. Supported resolution, bitrate, recording and playback concurrency depend on the selected recorder hardware and software. |
PROJECT REQUIREMENTS
Environmental & EMC testing
For international projects, specify the required test standard, method, severity and acceptance criteria in your inquiry. Potential references include MIL-STD-810 or IEC 60068 for environmental testing, and MIL-STD-461 for equipment EMC testing. Applicability must be reviewed for your application.
Test methods, levels and acceptance criteria are agreed for the configured system. Request applicable reports for your project; listing a standard does not indicate certification.
LET’S DISCUSS YOUR PROJECT
Configure your JSW-2024POE.
Tell us about your application, quantity and configuration requirements. Our sales team will help you plan the next step.
Open Project Enquiry with this product already selected.
Visit our Alibaba Storefront ↗


