Lianhe
LIANHE
Industrial Computing

PoE switches

JSW-8010

JSW-8010 Rugged PoE Switch

Layer 2 managed · PoE+

  • Copper Ethernet8 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
  • Optical interfaces2 × 1000BASE-X optical channels.
  • Switching & managementLayer 2 managed Ethernet; store-and-forward switching.
Request a quote ↗Full specifications ↓

DESIGN & CONFIGURATION

Product overview

  • 8 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
  • 2 × 1000BASE-X optical channels.
  • 1U rack enclosure with rugged connector options
  • Configurable PoE budget and network management

TECHNICAL DATA

Reference specifications

Reference configuration. Customizable to your requirements.

Copper Ethernet8 × 10/100/1000BASE-T Ethernet ports with rugged circular connectors.
Optical interfaces2 × 1000BASE-X optical channels.
Switching & managementLayer 2 managed Ethernet; store-and-forward switching.
Switching platformMarvell Prestera-based OEM switching design can be specified. ASIC, PHY, control processor and network software are selected for the required port layout and operating environment.
Port bandwidth target20 Gbps aggregate full-duplex port-bandwidth target for the listed Ethernet interfaces. Actual forwarding capacity, packet rate and enabled-feature performance are validated for the selected ASIC and firmware.
MAC address table8K-entry target; dynamic learning, aging and static entries. Final table resources depend on the ASIC and enabled features.
VLANIEEE 802.1Q VLAN configuration; target up to 4K VLAN identifiers. Port-based VLANs and additional policies depend on the selected firmware.
MulticastIGMP v1 / v2 / v3 snooping options; multicast table resources and configuration depend on firmware.
Quality of serviceConfigurable traffic prioritization, 802.1p / DSCP mapping and weighted queue scheduling; final queue count and policies depend on firmware.
Routing optionsLayer 2 reference configuration; IP routing is not included. A Layer 3 variant requires a suitable ASIC and software feature set.
SecurityRole-based access, SSH / HTTPS administration, SNMPv3 options, port security and storm control. 802.1X and RADIUS can be specified with compatible firmware.
Management interfacesLocal console and command-line management; HTTPS web interface and SNMP options. Configuration backup, firmware upgrade and event logging depend on the selected software image.
PoE capabilityIEEE 802.3af / 802.3at PoE / PoE+ integration; up to 30 W PSE output per enabled PoE+ port, subject to the total power budget. Specify simultaneous powered-device loads; full power on every port is not assumed.
Aggregate PoE budgetAggregate PSE output budget is specified in the quotation, separately from AC input power and base-switch consumption.
Optical specificationMultimode 850 nm optical reference; rugged multi-fiber connectors. Link distance, fiber type and optical budget are confirmed per installation.
Copper link operation10 / 100 / 1000 Mbps auto-negotiation and auto MDI / MDI-X. Gigabit links operate full duplex.
Console & power connectors1 console interface and 1 power input in the reference layout; locking circular connectors, pinout and cable assemblies specified for each project.
Power input100–240 V AC, 50–60 Hz reference input. Supply capacity is engineered for electronics, optics and any PSE load; optional DC input on request.
Enclosure & mounting1U rugged 19-inch rack enclosure; connector protection, finish and mounting hardware configurable.
Dimensions483 × 400 × 44.3 mm (W × D × H), enclosure-family reference; final drawings depend on connectors and mounting hardware.
WeightUp to 10 kg enclosure-family reference; actual weight depends on the selected power supply and modules.
Operating environmentTarget operating range: -20°C to +65°C; storage and humidity requirements specified per project. Qualification applies to the complete configured system, including PoE load and optics.
CustomizationCopper / optical port mix, network features, PoE budget, power input, connectors, cabling and environmental test requirements can be specified.

PROJECT REQUIREMENTS

Environmental & EMC testing

For international projects, specify the required test standard, method, severity and acceptance criteria in your inquiry. Potential references include MIL-STD-810 or IEC 60068 for environmental testing, and MIL-STD-461 for equipment EMC testing. Applicability must be reviewed for your application.

Test methods, levels and acceptance criteria are agreed for the configured system. Request applicable reports for your project; listing a standard does not indicate certification.

LET’S DISCUSS YOUR PROJECT

Configure your JSW-8010.

Tell us about your application, quantity and configuration requirements. Our sales team will help you plan the next step.

Request a Quote ↗

Open Project Enquiry with this product already selected.

Visit our Alibaba Storefront ↗